bytetable | Prints out the decimal/hexadecimal/binary equivalence tables for each possible bit combination in a byte. [src] |
cinmidi | A command-line program which prints the MIDI input stream to the screen with message arrival times and comments describing the MIDI messages. Has many formatting options. [src] |
mcont | Sends a continuous controller message to the MIDI output. Parameters can be either decimal or hex (if 0x is prepended). [src] |
midiperform | Plays a MIDI file with basic impulse conducting controls. [src] |
midithru | Have the computer act as a Patch Bay. Send MIDI input data to any MIDI output port. MIDI input can be sent to multiple output. [src] |
moff | Sends MIDI note-off messages to all notes on the specified channel and port. Parameters can be either decimal or hex (if 0x is prepended). [src] |
mpc | Sends a timbre-change message to the MIDI output. Parameters can be either decimal or hex (if 0x is prepended). [src] |
mplay | Sends a note-on message to the MIDI output. Parameters can be either decimal or hex (if 0x is prepended). MIDI drivers usually will automatically turn off the note. [src] |
msend | Sends any MIDI message to the MIDI output port specified. Parameters can be either decimal or hex (if 0x is prepended). [src] |
sysexio | System Exclusive messages are stored in a separate buffer from regular MIDI input messages. They are stored in a Circular Buffer which has a length of 256. The MidiInPort class will collect a system exclusive message. When it has finished receiving the sysex message, it will store it into the sysex circular buffer and then place a regular MIDI message into the regular MIDI input buffer. [src] |
tobin | Converts an input number into binary form. Parameters can be either decimal or hex (if 0x is prepended). [src] |
todec | Converts an input number into decimal form. Parameters can be either decimal or hex (if 0x is prepended). [src] |
tohex | Converts an input number into hexadecimal form. Parameters can be either decimal or hex (if 0x is prepended). [src] |
vlv | Converts/creates variable length values which are used in Standard MIDI Files to store the duration between MIDI message events in the file. [src] |